https://www.amtengineers.co.in Latest Products Sat, 18 Apr 2026 23:06:48 +0530 en-us https://www.amtengineers.co.in https://www.amtengineers.co.in/metal-pipe-threading-machine.htm https://www.amtengineers.co.in/metal-pipe-threading-machine.htm Wed, 08 Dec 2021 00:00:00 +0530 https://www.amtengineers.co.in/pvc-pipe-threading-machine.htm https://www.amtengineers.co.in/pvc-pipe-threading-machine.htm Wed, 19 Jan 2022 00:00:00 +0530 https://www.amtengineers.co.in/pipe-end-facing-machine.htm https://www.amtengineers.co.in/pipe-end-facing-machine.htm Wed, 19 Jan 2022 00:00:00 +0530 https://www.amtengineers.co.in/pipe-slotting-machine.htm https://www.amtengineers.co.in/pipe-slotting-machine.htm Tue, 18 Jan 2022 00:00:00 +0530 https://www.amtengineers.co.in/pipe-bevelling-machine.htm https://www.amtengineers.co.in/pipe-bevelling-machine.htm Wed, 19 Jan 2022 00:00:00 +0530 The Pipe Bevelling Machine is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. The Pipe Bevelling Machine mainly consists of the following :- Bed, - Head Stock, - Clamping Vice, - Beveling Head. BED : The Bed of Pipe Bevelling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb max. Vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8" BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. HEAD STOCK : The Head Stock body of Pipe Bevelling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. CLAMPING VICE : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4", 5", 6", 7", 8",). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. BEVELLING HEAD : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve. Note:- One set of Round Type Clamping Jaws will be provided with the machine. Other Round Type Clamping Jaws are Optional and will be supplied at an extra Cost https://www.amtengineers.co.in/circular-saw-sharping-machine.htm https://www.amtengineers.co.in/circular-saw-sharping-machine.htm Wed, 19 Jan 2022 00:00:00 +0530 https://www.amtengineers.co.in/chaser-grinding-machine.htm https://www.amtengineers.co.in/chaser-grinding-machine.htm Wed, 08 Dec 2021 00:00:00 +0530 https://www.amtengineers.co.in/coil-winding-machine.htm https://www.amtengineers.co.in/coil-winding-machine.htm Wed, 08 Dec 2021 00:00:00 +0530 Head StockHead Stock Body is casted from close grain cast iron. It is very rigid in design and strong enough to take maximum load. Head Stock is Oil filled complete with Oil filling hole, Oil level indicator and Oil drain hole. The main spindle is mounted on three anti-friction roller bearings (one cylindrical roller and one taper roller bearing at the front and one taper roller bearing on the rear). The head stock gear box is designed for four spindle speeds in both forward and reverse direction. The selection of spindle speed is by means of levers provided on the front side of head stock. All the shafts of head stock are mounted on antifriction roller bearings.The gears and bearings are lubricated directly with the help of oil pump provided in the head stock. A five digit revolution counter is also fitted with the head stock through gearing from main spindle to register the number of turns of spindle. Head stock is provided with 1200 mm dia, face plate having T-slots and holes for holding the winding moulds. A 76.2 mm spigot locating recess is provided on face plate to centrally locate the mould.BaseBase is casted from close grain cast iron. It is very rigid in design and strong enough to take maximum load. The Head Stock, Motor, Fluid Coupling, Thruster Brake etc. are mounted on the Base. The Base is provided with Foundation Holes of dia 20 mm. BedThe Bed is fabricated from I-Section and steel plates. It is Very Rigid and sturdy in construction so as to take maximum load. The Bed is machined and grinded on the top surfaces for smooth movement of the tail stock, the bed is provided with guide ways and slots throughout the length of bed to clamp the tail stock on any position of the bed. Rack is provided on the bed for easy movement of the tail stock. It is provided with Foundation Holes of Dia M20 for foundation. Front and rear stoppers are also provided to restrict the tail stock movement.Tail StockThe base of the tail stock is fabricated from steel plates. The main body of the tail stock is casted from close grain Cast Iron. The tail stock unit is moved on the bed by means of a rack and pinion arrangement. The Tail stock unit is provided with Gun Metal Liners so as to minimizes the wear and smooth movement over the Bed. Four Bolts are provided to clamp it on any position on the bed. https://www.amtengineers.co.in/lathe-machine.htm https://www.amtengineers.co.in/lathe-machine.htm Wed, 08 Dec 2021 00:00:00 +0530 https://www.amtengineers.co.in/die-head.htm https://www.amtengineers.co.in/die-head.htm Wed, 08 Dec 2021 00:00:00 +0530 https://www.amtengineers.co.in/pipe-beveling-machine.htm https://www.amtengineers.co.in/pipe-beveling-machine.htm Mon, 14 Apr 2025 00:00:00 +0530